Breedon Golden Amber Gravel

From £207.60
In stock
Product Calculator

Use our measurements calculator to work out how much of our product you will need

Delivery

Order before 11.30am for same day despatch. All orders are delivered on pallets.

*please specify QTY for a delivery estimate

Enter your postcode for an estimated delivery cost
Suitable For
  • Suitable for outdoor
  • Suitable for Paths
  • Suitable for Driveways
Delivery Information
  • Palletised orders

    Palletised orders. All orders will be delivered on a pallet

    Please make sure you read the delivery instructions to ensure you are able to receive a pallet delivery from our dedicated couriers.  We unfortunately do not offer hiab or crane offload.

  • Next Working Day Delivery

    Welsh slate Decorative Aggregate and Rockery Stone

    Standard delivery for orders placed before 11.30am Monday – Friday will be delivered normally within 4-6 working days. No deliveries at weekends or Bank Holidays.

  • Flooring, Paving and Walling

    Flooring, Paving and Walling

    Standard delivery is normally within 5-7 working days. No deliveries at weekends or Bank Holidays.

  • Breedon Self-Binding Gravel, Breedon Decorative Aggregate and Cobbles

    Breedon Self-Binding Gravel, Breedon Decorative Aggregate and Cobbles

    Standard delivery is normally within 5-7 working days. No deliveries at weekends or Bank Holidays.

Why choose uk stone direct
100% British

100% British

All the natural stone we sell is quarried in the UK, so we can guarantee everything we sell is sustainable, ethically sourced and with a low carbon footprint.

Directly from Quarry

Directly from Quarry

We own the quarries, so we can carefully select the unique stone and deliver direct to you, giving you unprecedented access to the source of this natural material, laid down millions of years ago.

Best Prices

Best Prices

Buying direct means no middlemen, so you get the prices direct from the quarries.

Free Stone Samples

Free Stone Samples

Ability to order stone samples to help choose the perfect British natural stone for your project.

Description

Product Details

Breedon Golden Amber Gravel is the ultimate self-binding solution for perfect pathways and driveways and the only self-binding gravel to hold The Royal Warrant.

Soft and natural in appearance, Breedon Golden Amber self binding gravel complements both modern day and historical projects. Held in very high regard for its performance, durability and versatility it can be seen at some of the country's most prestigious stately homes and enhances many of the most beautiful National Trust and English Heritage gardens.

Breedon Golden Amber gravel is 100% environmentally friendly, a natural limestone material graded 12mm to dust with a high content of naturally occurring marl which gives the product its unique self binding properties.

Once compacted in accordance with the laying instructions, Breedon Golden Amber gravel knits together to form a solid base and a surface which self scarifies with use leaving a fine dressing of chippings, making this an ideal choice for pedestrian and vehicular use.

Breedon Golden Amber gravel can be laid by hand or through a paving machine.

Key Features

Why and where to use Breedon Golden Amber Gravel

Key Features:

      • Breedon Golden Amber gravel provides a non-slip, non-trip surface which knits together to form a solid bonded, durable base and a surface which scarifies with use for a beautiful, natural soft appearance.
      • More aesthetically pleasing than concrete or asphalt.
      • 100% environmentally friendly material, which is also suitable for use with wheelchairs, walking frames and mobility scooters.

Please note that Breedon self binding gravel is not free draining and requires a cross fall or camber to shed water from its surface into adequate drainage.

  • Contact us for any bulk order enquiries.
Specification
More Information
Suitable For Suitable for outdoor, Suitable for Paths, Suitable for Driveways
Brand Breedon Special Aggregates
Shipping Label aggregate
Product Questions
Laying Instructions
Laying Instructions

The approximate coverage is 8m2 per tonne. It is recommended that Breedon Golden Amber Gravel (Breedon Gravel) is laid at a finished compacted thickness of 50mm.

Please note that Breedon self-binding gravel is not free draining and requires a cross fall or camber to shed water from its surface into adequate drainage.

Breedon Gravel is a natural material quarried from selected limestone and graded approximately 12mm (1/2”) to fines; the fines content being naturally occurring marl which acts as the self setting agent when the material is watered and rolled to fullest compaction in the manner described below.

Breedon Gravel must be laid onto a compacted quarried MOT Type 1 sub-base to clause 803. The depth of which should be of sufficient strength and stability to carry the proposed traffic (we suggest a minimum of 150mm if the ground is good) and also the area concerned should be porous enough to ensure that water is not held directly in or immediately below the Breedon Gravel. If a weed suppressant membrane is required, this must be installed underneath the Type 1 sub-base and not in between the sub-base and Breedon Gravel.

The Type 1 sub-base should be laid and rolled using a roller of suitable weight, i.e. minimum 1.5 tonnes for footways and similar works, and minimum 2.5 tonnes for car parks etc. By using a heavier roller, this helps achieve maximum compaction with fewer passes, however on smaller areas a pedestrian roller may be used although it is vital that the surface is rolled sufficiently to achieve fullest compaction prior to water rolling. This may take a few more passes over the area. The sub-base should be laid with cross falls or cambers prior to the application of the Breedon Golden Amber surface course.

Prior to use it is recommended that the moisture content of the Breedon Gravel is checked, particularly in prolonged dry conditions or where material has been stored for a period of time before use. When squeezed by hand the material should have enough moisture within in that it should stick together. If the material is dry we advise that a hose with a fine mist setting is sprayed over the Breedon Gravel and the heap is turned over sufficiently to replenish lost moisture and to achieve the necessary consistency.

The Breedon Golden Amber Gravel should be spread onto the prepared foundation using a flat board or the back of a rake. Do not use the prongs of a rake as this will segregate the material. Spread the material out to a depth of approximately 75mm in order to achieve a finished compacted thickness of 50mm.

The surface must then be rolled using a roller of similar type to that used for compacting the foundation with the vibratory action of the roller switched on and the area should be continually rolled until fullest compaction is achieved. It is imperative that Breedon Gravel is laid to a cross fall or camber in order to shed surface water - it must NOT be laid flat. To give some indication, an adequate fall would be 1 in 55 for a pathway and a minimum of 1 in 40 for much wider walkways, courtyards and car parks etc. The same gradient should apply when installing the Type 1 sub-base. Please ensure that adequate drainage is installed in proportion to the surface area being laid. If rainfall is not dispelled rapidly this can lead to an ingress of surface water which will prevent the hardening and binding process of the Breedon Golden Amber Gravel. After this initial laying to cambers and falls it is probable that occasional coarse areas will be evident where segregation of the Breedon Gravel may have occurred. At this point, fines can be sieved from the main heap of material and scattered onto these coarse areas before being re-rolled.

Once a uniform appearance has been achieved the second stage can be undertaken. This is the water rolling of Breedon Gravel for which the vibratory action of the roller must be switched off.

By using a water roller, water is automatically sprayed onto the drum of the roller. The fundamental aim is to have a film of water covering the whole Breedon Gravel surface but in most instances the water tank on the roller may be insufficient for dispelling enough water onto the drum and additional water will be required, this is almost always the case in dry warm weather. If the Breedon Gravel is sticking to the roller, this indicates that there is insufficient water being applied. To rectify this, it is advisable that a hose is directed onto the drum of the roller as the material is rolled, saturating the drum. There should be a flood of water pushing forward as the drum rolls the surface. Never direct a hose directly onto the Breedon Golden Amber Gravel itself as this will wash out the necessary fines which are required for the material to bind. The object of water rolling this material is to float sufficient fines to the top surface of the gravel to obtain a well-bonded finish.

It is imperitive that sufficient water is added to the material during the water rolling process. Failure to float the fines to the Breedon Golden Amber Gravel surface will result in the re-softening of the material, leading to an unbound finish. Approximately five gallons of water for each tonne of laid material is required to adequately float the marl fines to the Breedon Gravel surface, which will allow the product to bind and harden. As a visual guide when sufficient water has been applied, the area should have a similar appearance of freshly laid concrete, giving a shiny, glassy finish over the whole surface. Once this has been achieved the binding process can begin.

If there are any lines or grooves in the gravel left by the weight of the roller, a soft wide broom can be used to gently pass over the surface whilst still wet – this will remove any lines and leave a uniform surface finish.

If laying large expanses of Breedon Golden Amber Gravel it is important that the whole laying process is completed per section. Newly laid areas can be "butted up" next to previously laid material provided that a neat edge is used. When floating the fines up to the surface in the adjoining sections simply pull a soft broom across the surface as previously advised.

It is important that the area should then be allowed to dry out fully before being opened up to general use. The length of time to allow is dependant on weather conditions, but this can take up to a period of two weeks or more. We would also advise during the drying process that the area is not used. Please note that materials should never be laid in frozen conditions. 

Because Breedon Gravel depends entirely on its own binding properties for its stability, it is not practical to lay Breedon Gravel on steep slopes where the angle of fall is steeper than a 1 in 15 gradient. Long continuous fall over sloping ground can be minimised by the formation of deep steps, this will reduce the risk of ruts occurring caused by the action of flowing storm water.

On completion, the Breedon Golden Amber Gravel surface will be very smooth and uniform. Over time, with weathering and trafficking the surface will scarify, giving a light dressing of chippings over the area, whilst maintaining a bound, solid base. Should a lasting smooth appearance be required, the loose chippings can be swept from the surface using a soft broom. However, the surface will naturally scarify with use, therefore the sweeping process would need to be repeated when necessary.

 

“Stone Federation’s Quarry Forum is passionate about promoting the use of British natural stone as an attractive, sustainable building material that provides incredibly durable results.”  -   Stone Federation Great Britain

Breedon Golden Amber Gravel

From £207.60